JOIN US  |  ABOUT THE CLUB PRESIDENT




Pandora

Project By: Young Guns Speed Shop (hello@ygspeedshop.com)
Website: www.ygspeedshop.com

Click To EnlargeWhen we got the honor to do a design study for Ducati based on one of their latest racer we did not have to think twice. It started off as a stock Ducati and ended up being… the Ducati pandora.

Based on a 2016 Monster 1200 R our own vision of a modern racer became reality. The pandora is hybrid between a GP-bike and a contemporary cafe racer. Inspired by the classic sport bikes from the 70’s such as the 900ss and 750 sport we wanted to keep the classic lines of that era but still give it a modern look.

After building the rear frame we took on the seat and the tank. We had the idea of building the seat and tank out of one piece. We started with making an aluminium construction to put clay on it to shape the monocoque. A friend then made a mold and the final fiberglass monocoque.

In order to keep low and clean lines the fuel tank was moved to back. The fuel cap and a 2.5 liter aluminium tank are in the rear while the main tank sits where the battery box and lots of electrical things previously were. Combined the two aluminium tanks fit more than enough gas to get you places. 9 liters of gas to be exact.

Where one would expect the fuel tank we now put the brain of the motorbike: Everything from the abs to batteries we hid under there. Also we used a custom-made cooler that is half the size of the original one yet more efficient. We replaced the rubber hoses with aluminium pipes to fit the radical appearance of the bike.

The exhaust work was done in-house and replaced the original 2-in-1 system. The megaphones are metal pressed out of a flat sheet on the leith. The handlebars we replaced with clip-ons. If your dream of a modern, yet classic race bike is similar to ours, we got good news for you: The bike is up for sale, if you’re seriously interested in owning this beauty get in touch with us.

All pictures by racerfish.com & craftrad.


Pandora

Pandora
(2016 Ducati Monster 1200 R)


YGSS_logo


FaceBook

Twitter

Project


Legal Notice

Motor Vehicle Modification
Customizing, forced induction systems (turbocharging, supercharging, nitrous oxide, etc.), frame modification, and other major vihicle modifications should never be taken lightly. Forced induction systems will shorten your vehicle mechanical life and increase your risk of serious accidents. The information in this website has been collected from several sources, and may contain errors. We do not accept any responsibility for the use of the information contained in this site. Be sure to double check all information and proceed with extreme caution. Any modifaction to your engine, frame or other vital part of your vehicle should only be done my trained professionals.

Racing: High Speed Driving/Riding
Drag racing, road racing and driving a motor vehicle are ALL inherently dangerous and should never be taken lightly. High speed driving/riding should only be done on closed-cuites, under strict guidlines. High speed driving/riding will shorten your vehicle mechanical life and increase your risk of serious accidents. Any form of street racing is just unacceptable. Never race on the street!

Manufacturer Representation
These project may not be officially endorsed by the manufacturer the project is representing. The projects are personal concepts only and does not reflect on the manufacturer. Any copyrighted logos or design cues that might be infringed on by this project are totally without malus, and only used by the designer to show their respect for the manufacturer. This club does not have any official sponsorship or endorment from any manufacturers.

DucCutters Logo
The DucCutters logo (slashed circle and cross-bones) is a register trademark of the club presdient, William Johnson. The logo is intended for the promotional use of the DucCutters club.

Reporting An Isuue
DucCutters is registered with the US Copyright Office in accordance with the terms of the Digital Millennium Copyright Act (DMCA #DMCA-1000230). Possession Studios may remove any content that allegedly infringes anyone's copyright. Direct notices regarding infringement should be sent to azbill@PossessionStudios.com.

DucCutters